[face=Arial]Hello:
Dear friends!
Our company is a manufature of Flex plate and Flexo ink!
Details as following:
1,Printing plate name
DRC
2,The application scope
corrugated cardboard
paper bag prints
the thick red plate
multi-layer handbag
3,The plate material characteristic
extremely good exposure latitude, does not need cover the plate
short exposure time, suits the low UV energy output equipment use
plate material degree of hardness to be possible to change the viscosity because of after
exposure time to be low, only needs few light processing, enhances the production efficiency
enhancement resistance sunlight and anti-ozone ability
even consistent thickness, guaranteed the good print quality
enormous article chart depth, causes the printing effect to be clear, to be exquisite, suits the Asian writing specially the printing
printing plate special resin bottom base, guarantees the precise wrap
prominent printing ink shift performance
4,Resin condition
solid plate
5,Plate material thickness
3.94/7.00MM
6, Plate material color
Red1,Printing plate name
TDR
2,Application scope
Corrugated cardboard
Paper
3,Plate material characteristic
Extremely good exposure and printing latitude
Optimized rubber degree of hardness and the elasticity, cause printing the washboard effect to fall lowly
The good printing absorption of shock effect reduces the machinery influence
The small pressure establishment, and realizes the perfect balance on the spot in the mesh point
4,Resin condition
solid plate
5,Plate material thickness
2.84/3.94/7.00mm
6, Plate material color1,Printing plate name
HDC
2,The plate material characteristic
extremely good exposure latitude, does not need cover plate
short exposure time, suits the low UV energy output equipment use
even consistent thickness, the guarantee good print quality
enormous article chart depth, causes the printing effect to be clear, to be exquisite, suits the Asian writing specially printing
3,Plate material thickness
3.94MM
4, application scope
Corrugated paper box direct printing
5, resin condition
The solid plate
6, the plate material color
RedAP01—Flexography Water-base printing ink The AP01 series product is uses the import high-quality acrylicresin, the pigment, the ethyl alcohol and the water, helps the liquid shape printing ink which the medicinal preparation purification becomes, this printing ink may act according to the different type the operating speed to carry on the smoke package, the wineshop banner, does not do the rubber label and each kind of upscale swathe flexible version printing work.
1，The product characteristic
Color standard, the transparency good, the intensity of color high, the color bright, the luster is fine;
Prints the mesh point clear, the printing level stereoscopic effect strong, the fine wear-resisting cha racter and the adhesion;
The printing ink printing transferability, the class even performance good, print the stability finely, easy to clean;
The non-irritant smell, the drying velocity quick, the printability is good, may use the computer directly the use, does not need to adjust. 2， Is suitable the parent metal
Art paper, the carton, spreads the cloth or has not spread the cloth paper printing;
After electronics corona processing PE, OPP plastic film. 3， The technical specification
May provide four colors, the PANTONE primary colors, the special color ink, dissolves the performance to be good again;
Viscosity: Zahn Cup4#(25℃) 15~30 seconds
degree of fineness: ≤10μm
density: Approximately 1.05g/cubic centimeter
acidity: PH=8.2~9.3
packing specification: 20 kilograms/barrels 4， The operating instructions
suggested helps the medicinal preparation recruitment: (%)
Name Use Recruitment
defoamer Reduced air bubble production 0.5%
bears the grinding Enhances the printing ink to bear the friction performance 2-5%
medicinal preparation slowly Reduces the drying velocity 2-4%
stabilizer Maintenance printing ink PH value and viscosity 2-4%
cleaning liquid Clean network grain roller and printing plate
Printing hands-on viscosity: When printing may fast and the actual working condition makes the corresponding adjustment according to India;
Printing condition: 65~175 plate materials, 200~1200 wire grain roller. Spreads the cloth quantity is 4-12 gram/square meter, but uses actually spreads the cloth quantity size to be decided in different accepts for printing the thing and the production needs as well as the specific request (for example: The printing ink viscosity, the paper, the printing plate, the net grain lines paper the number the height, the printing pressure and so on). 5, The flexo ink reported safely
The flexo ink use conforms to the related stipulation, and authenticates and achieves European Union through EN-71 part3 and ASTM F963-96a “ROHS”, “FDA” and so on the prohibition rule standards. 6, Matters needing attention
Flexo ink should mix evenly fully before the use, after the use -odd ink should cap seals, in order to avoid the printing ink dry and hard and falls the dust, storage temperature for 20±5℃. May not with other type printing ink mix, the old -odd ink if includes time the impurity should give to filter first, then increase fresh printing ink mix use.
If the printer off-air time is long, after should use the clear water clean printer to print again first, in order to avoid the printing ink dry and hard affects the print quality.
Please not store up under the high temperature or the hot sun illumination, under the usual condition, the effective storage period is a year. my maoyitong:marina0109
my skype:starsilly1
Best wishes to all of you! Red
------------------
...
|
跨国外贸论坛
【返回跨国外贸论坛首页】 收藏本论坛 热门专题 热门帖子 
.
我要采购 -> 产品介绍，供应贴－－在此发贴！！
您是本帖的第 309306 个阅读者
发帖时间 - 2007/7/18 19:06:03